Sintered Metal Spur Gears (LS)
The LS Sintered Spur Gears are made from pressed metal. These gears have a lower cost due to elimination of machining and reduction in wasted material.
Compare
Bore Type: Plain
Module: 0.5
No. of teeth : 12
Shape: S3
Bore (A): 2.0 (mm)
Bore 2 (A'): 2.1 (mm)
Hub Diameter (B): 7.4 (mm)
Pitch Diameter (C): 6.00 (mm)
Outer Diameter (D): 7.00 (mm)
Face Width (E): 4.0 (mm)
Hub Width (F): 3.0 (mm)
Total Length (G): 7.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.5
No. of teeth : 16
Shape: S3
Bore (A): 2.0 (mm)
Bore 2 (A'): 2.1 (mm)
Hub Diameter (B): 9.4 (mm)
Pitch Diameter (C): 8.00 (mm)
Outer Diameter (D): 9.00 (mm)
Face Width (E): 4.0 (mm)
Hub Width (F): 3.0 (mm)
Total Length (G): 7.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.5
No. of teeth : 20
Shape: S3
Bore (A): 3.0 (mm)
Bore 2 (A'): 3.1 (mm)
Hub Diameter (B): 11.4 (mm)
Pitch Diameter (C): 10.00 (mm)
Outer Diameter (D): 11.00 (mm)
Face Width (E): 4.0 (mm)
Hub Width (F): 4.0 (mm)
Total Length (G): 8.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.5
No. of teeth : 30
Shape: S1
Bore (A): 3.0 (mm)
Bore 2 (A'): 3.1 (mm)
Hub Diameter (B): 9.0 (mm)
Pitch Diameter (C): 15.00 (mm)
Outer Diameter (D): 16.00 (mm)
Face Width (E): 3.0 (mm)
Hub Width (F): 4.0 (mm)
Total Length (G): 7.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.5
No. of teeth : 50
Shape: S9
Bore (A): 4.0 (mm)
Bore 2 (A'): 4.1 (mm)
Hub Diameter (B): 12.0 (mm)
Pitch Diameter (C): 25.00 (mm)
Outer Diameter (D): 26.00 (mm)
Face Width (E): 3.0 (mm)
Hub Width (F): 5.0 (mm)
Total Length (G): 8.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.5
No. of teeth : 60
Shape: S9
Bore (A): 4.0 (mm)
Bore 2 (A'): 4.1 (mm)
Hub Diameter (B): 12.0 (mm)
Pitch Diameter (C): 30.00 (mm)
Outer Diameter (D): 31.00 (mm)
Face Width (E): 3.0 (mm)
Hub Width (F): 5.0 (mm)
Total Length (G): 8.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.5
No. of teeth : 70
Shape: S9
Bore (A): 4.0 (mm)
Bore 2 (A'): 4.1 (mm)
Hub Diameter (B): 12.0 (mm)
Pitch Diameter (C): 35.00 (mm)
Outer Diameter (D): 36.00 (mm)
Face Width (E): 3.0 (mm)
Hub Width (F): 5.0 (mm)
Total Length (G): 8.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.5
No. of teeth : 80
Shape: S9
Bore (A): 4.0 (mm)
Bore 2 (A'): 4.1 (mm)
Hub Diameter (B): 12.0 (mm)
Pitch Diameter (C): 40.00 (mm)
Outer Diameter (D): 41.00 (mm)
Face Width (E): 3.0 (mm)
Hub Width (F): 5.0 (mm)
Total Length (G): 8.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.8
No. of teeth : 12
Shape: S3
Bore (A): 3.0 (mm)
Bore 2 (A'): 3.1 (mm)
Hub Diameter (B): 11.6 (mm)
Pitch Diameter (C): 9.60 (mm)
Outer Diameter (D): 11.20 (mm)
Face Width (E): 5.0 (mm)
Hub Width (F): 4.0 (mm)
Total Length (G): 9.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.8
No. of teeth : 16
Shape: S1
Bore (A): 3.0 (mm)
Bore 2 (A'): 3.1 (mm)
Hub Diameter (B): 8.0 (mm)
Pitch Diameter (C): 12.80 (mm)
Outer Diameter (D): 14.40 (mm)
Face Width (E): 4.0 (mm)
Hub Width (F): 4.0 (mm)
Total Length (G): 8.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.8
No. of teeth : 20
Shape: S1
Bore (A): 3.0 (mm)
Bore 2 (A'): 3.1 (mm)
Hub Diameter (B): 9.0 (mm)
Pitch Diameter (C): 16.00 (mm)
Outer Diameter (D): 17.60 (mm)
Face Width (E): 4.0 (mm)
Hub Width (F): 4.0 (mm)
Total Length (G): 8.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.8
No. of teeth : 30
Shape: S1
Bore (A): 4.0 (mm)
Bore 2 (A'): 4.1 (mm)
Hub Diameter (B): 12.0 (mm)
Pitch Diameter (C): 24.00 (mm)
Outer Diameter (D): 25.60 (mm)
Face Width (E): 4.0 (mm)
Hub Width (F): 5.0 (mm)
Total Length (G): 9.00 (mm)
Pressure Angle : 20°
Bore Type: Plain
Module: 0.8
No. of teeth : 50
Shape: S9
Bore (A): 4.0 (mm)
Bore 2 (A'): 4.1 (mm)
Hub Diameter (B): 12.0 (mm)
Pitch Diameter (C): 40.00 (mm)
Outer Diameter (D): 41.60 (mm)
Face Width (E): 4.0 (mm)
Hub Width (F): 5.0 (mm)
Total Length (G): 9.00 (mm)
Pressure Angle : 20°
Compare