KHK MHP1-1090L, Module 1.09, 1 Tooth, Left Hand, High-Ratio, Hypoid Gears

Documentation

PDF Catalog
Selection Guide / Technical Info.
Detailed Drawing
KHK MHP1-1090L, Module 1.09, 1 Tooth, Left Hand, High-Ratio, Hypoid Gears
High-Ratio, Hypoid Gears (MPH)

High speed reduction ratio, high efficiency, high rigidity and compact gear assembly.


There is no guarantee or representation to the user as to the accuracy, currency, suitability or reliability of this data for any purpose. The user accepts the data "as is", and assumes all risks associated with its use. KHK USA assumes no responsibility for actual or consequential damage incurred as a result of any user's reliance on this data.

Please note that all J-Series, F-Series, & H-Series products are made-to-order, noncancellable, and non-returnable.

Notice: This product is discontinued.
Please contact KHK for alternative solutions by calling 516-248-3850 or filling out the form below.
Anything you would like specific help with?
Error: Product pricing is not available at this time. Please check back again.

KHK MHP1-1090L, Module 1.09, 1 Tooth, Left Hand, High-Ratio, Hypoid Gears Specifications

Metric Inch
Gear Type
Bevel Gears
Construction
High-Ratio, Hypoid Gears
Bore Type
Plain
Reduction Ratio
90
Actual Module
1.089
Module
1
No. of teeth
1
Direction of Spiral
Left Hand
Shape
B8
Shaft Diameter / Bore (A)
31.1 (mm)
Pitch Diameter (C)
15.70 (mm)
Outer Diameter (D)
15.70 (mm)
Mounting Distance (E)
170.0 (mm)
Face Width (J)
10.00 (mm)
Shaft Length
116.0 (mm)
Offset (L)
32.0 (mm)
Radial Load Coefficient (Clock-Wise)
464.70
Radial Load Coefficient (Counter Clock-Wise)
1,404.28
Thrust Load Coefficient (Clock-Wise)
2,777.98
Thrust Load Coefficient (Counter Clock-Wise)
-2,443.73
Allowable Transmission Torque (N-m)
71.40
Allowable Transmission Torque (kgf-m)
7.28
Total Length (F)
149.00 (mm)
Bending Strength (N-m)
71.4000
Bending Strength (kgf-m)
7.2800
Backlash
0.05-0.15 (mm)
Weight
0.76000 (kg)
Precision Grade
JIS B 1704:1978 grade 3
Gear Teeth Type
Gleason
Pressure Angle
20°
Material
SCM415 (AISI 4115) Alloy Steel
Heat Treatment
Carburizing
Tooth Hardness
HRC 60-63